Hi, if you have stumbled across here, welcome to our test site. This site is a working replica of the main aawforum.org website where we test and evalute new features and software updates. While you can login and post here, push notifications and email notifications have been disabled and any and all content on this site will be delelted with no notice. So please feel free to look around at our pile of shavings while we continue to refine the AAW Forums but please do not post any real messages here as no one will see them. Thanks!
Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.
This is a very interesting burl, soft and fragile due to the resin inclusions. Oilded and buffed stands around 10" with Gidgee collar.
A gift for our niece in MD
This 6 inch tall vase was turned using a 3-point off-axis method to provide the spiral shape. Carving tools were used at the top to highlight the twist. The wood is ash and the finish was done with india ink and white liming wax to highlight the grain
Pheonix is made from Lacewood. it is about 25cm in diameter. I have carved and textured the surface to give it a metalic like appearance. I know I have posted quite a few photos in the last week. This is the last picture I will be uploading untill after Christmas so yu can all have a bit of...
Here is the latest piece in my Open Spiral series. This is a commissioned work and the buyer has been calling frequently, so I named the piece Desire. The body of the piece was created during the filming of my instructional DVD showcasing my Cable Driven Router System.
Size is 19 tall x 13...
This was a project that has been in my head since the summer. The wedding was actually a couple days after Christmas so it was a late gift. I wanted to give it to the couple on their 1 month anniversary so I didn't have time to take a picture with my light box.
The wood is maple and the...
Unknown species
6.25" (160mm) diameter
16.75" (425mm) high
spirals 1.15" (30mm) diameter (sorta round)
balls 2.1" (53mm) diameter.
Details at http://www.woodworkforums.ubeaut.com.au/showthread.php?t=57412
(Image access may, or may not, be limited.)
Open Spiral Ash sculpture symbolizing the powerful winds blowing throughout the universe.
This is the most technically accurate piece in my open spiral series.
Size: 14" wide x 16" tall
All comments are appreciated thanks.
This is the first piece of my open spiral series, entitled "the Phoenix" ("the Fury", shown in my gallery is the second of the series). The Phoenix was my entry into a local woodturning competition titled "It Grows on Trees which featured works made from trees taken by...
Open spiral turning made of Ash and Walnut. Measurements are 15 W by 12 H. Currently on display at the Detroit Institute of the Arts resale gallery. Comments are welcome, thanks!
The spiraling downward 15 X 1.5 inch diameter steps (each approx 5/16 thick) are on 8 parrallel axes on a diameter of 1.5 inches with the center being the center of the original piece 3" diameter and 8" long Lignum vitae. Base, steps and goblet are turned from 1 piece no separates no...
One piece As always no glue.
Zebrano 14 steps on 12 centers 5 inches high (spiral) 2 and 3/4 base diameter. Spindle is maple.
finish is antique gel varnish.
Turned for Chris Wright for a Challenge and Trade at Woodturner's Resource.
Made from a mystery burl and Bubinga, with a single Walnut cutaway spiral that started as a double twist.
The vessel measures 8"x3", and the finial is 5.5"x2.5". The lid is also 5.5"...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.