• Hi, if you have stumbled across here, welcome to our test site. This site is a working replica of the main aawforum.org website where we test and evalute new features and software updates. While you can login and post here, push notifications and email notifications have been disabled and any and all content on this site will be delelted with no notice. So please feel free to look around at our pile of shavings while we continue to refine the AAW Forums but please do not post any real messages here as no one will see them. Thanks!
  • Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.

Chuck loosening during turning - Help requested

Joined
Feb 11, 2021
Messages
7
Likes
4
Location
Clarksville, IA
I have the nova chucks and have always had problems with tenons and bowls flying off the lathe. I went to using a mortise and problem solved. I always would dovetail my tenon not knowing they recommend it to be straight. I will have to try one with a straight tenon and see if it works better.
That should solve your problem.
 
Top