I keep thinking that there was something on the forum or in the magazine giving guidelines for cutting logs for blanks. Anyone know of this? Maybe something on Youtube? Had loads of wood that need turning. Thanks.
-
Hi, if you have stumbled across here, welcome to our test site. This site is a working replica of the main aawforum.org website where we test and evalute new features and software updates. While you can login and post here, push notifications and email notifications have been disabled and any and all content on this site will be delelted with no notice. So please feel free to look around at our pile of shavings while we continue to refine the AAW Forums but please do not post any real messages here as no one will see them. Thanks!
-
Welcome new registering member. Your username must be your real First and Last name (for example: John Doe). "Screen names" and "handles" are not allowed and your registration will be deleted if you don't use your real name. Also, do not use all caps nor all lower case.
Sawing wood for turning?
- Thread starter John Torchick
- Start date
Robo hippy has one on YouTube about cutting logs into bowl blanks if that is what your looking for.
I have a bunch of videos up on You Tube, mostly about bowl turning. This includes chainsaw and bandsaw prep of logs for bowl blanks... There are others as well....
robo hippy
robo hippy
Thanks! Will look at them. Have some nice logs that are screaming to be turned into something impressive.
Reed's video is good. If you have access to a DVD by David Ellsworth or Glenn Lucas, and maybe others, they include a raw woodcutting demonstration in the bowl turning videos. Al Hockenberry probably has a video and John Jordan probably has on a DVD something about deciding how to cut the raw log to get the grain or piece you want.
Also an excellent article by Dale Larson in American Woodturner, 2018
Again, thanks for the information. I have some log sections of some Osage orange, walnut, sassafras, etc. that need to be turned. My wife asked the other day, "What are you going to do with all this wood?" We all know that a woman's question is interpreted as a command.
If your wife was a quilter, she wouldn't have to ask....
robo hippy
robo hippy
I think your quote also applies to knitters, which, fortunately, my wife is. I don't talk about her yarn stash and she doesn't talk about my wood pile, or my two lifetimes worth of dried bowls waiting for 2nd turning or sanding. We both seem to have strong urges to acquire more.
She has made quilts for the grandkids when they were born but not piece quilts. She is an old sew-and-sew.
John Jordan
AAW Advisor
- Joined
- Jun 24, 2008
- Messages
- 460
- Likes
- 320
- Location
- Cane Ridge (Nashville), TN
- Website
- www.johnjordanwoodturning.com
A couple of articles on my website.
John
John
Thanks, John Jordan. My shop is small and has been "dedicated" to a remodel project which is almost done. Cleanup and back to sawing and turning!
Cutting a log into bowl blanks leaves a turner with a quandary. I do not have a lathe large enough or slow enough to handle some beautiful large blanks. So there is a pallet in the barn filled with super large bowl blanks One crotch black cherry piece that could be a shallow 24 to 26 inch bowl.
Found it, June 2018, page 28, for those interested in reading it.
Michael Nathal, thanks from a former Buckeye.
The setup shown is something I came up with to be able to cut down the center of the offset pith of a 12" diameter log on a bandsaw with a 12" capacity. This gives a nicer cut that is more controllable and faster then free handing with with a chain saw.
The jig was made from a 3x 3 birch skid planed down to 2 1/2 square and cut a few inches longer then the log to be ripped, then ripped diagonally. The left hand V block is permanently attached front and back to cross pieces. The open sided jig is placed on the band saw table and the right hand V block is held in place with construction screws thru the slotted holes.
The jig is pulled to the front of the saw table till the rear cross piece is up to the back of the blade, the log is placed into the jig , the fence is adjusted and the cut is made.
Interesting set up Don. I have pondered a sled that would do some thing like this. Most of the time, I will stand them on end and cut. The bandsaw dust collection does not like all the hair balls that form when ripping down the pith. I have knocked the bark off, using an axe, and making it at least half way flat, then running it through, generally with a chalk or pencil line down where I am ripping so I am not crossing the pith. I had thought about a half sled so I can push all the way through, but it would require dogs of some sort to keep the log from tipping..... Now, I am going to have this sled on my mind for a long time....
robo hippy
robo hippy
This is what I use. It uses screws to hold log on sled.
View: https://www.youtube.com/watch?v=Kb1QC-Zv2PI
Gerald I have one I made close to that.
I'm late to the party, but Sam Angelo ( "Wyoming Woodturner" ) and Mike Mahoney also have log processing videos out there on the Tube.
Jason, thanks for the additional names.